CHANDAN HOT METAL DETECTOR & DIGITAL AUTO CUTTING SYSTEM

CHANDAN HOT METAL DETECTOR & AUTO CUTTING SYSTEM

We have pleasure to introduce ourselves as manufacturers and suppliers of ROTARY SHEAR AUTO CUT control systems, while eliminating traditional manual cutting, it is an ultimate cost and scrap saver system. The sensor (H.M.D) can be used for end piece By Pass on TMT mills.

THE H.M.D is capable of sensing/responding to any hot metal above 300°C and up to 1200°C, for a distance between 1 meter and above depending on light intensity illumination of the hot object.

I. The Sensor (H.M.D) has its wide and versatile application in all steel Industries for:

A) Automatic sensing of hot metal, for subsequent versatile applications in T.M.T plants.

B) For operating Rotary Shear Etc.

This system, actuates the rotary/flying shear in steel plant .it provides a healthy substitute of manual cutting exist in a plant, by operating the rotary shear.

II. AUTO CUTTING SYSTEM is guaranteed to achieve:

EQUAL CUT LENGTH of ±6 INCH APPROX. The system (timer) can be set up to the third decimal, means 0.001 or 1,000^TH of the speed of hot metal which can achieve lowest scrap ever produced .Provided the mill motors, rollers & rotary shear pusher/Puller are in perfect condition. This is applicable for any Mill Speed and any desired length.

III. DIGITAL COUNTER (OPTIONAL)

Counting of hot metal production i.e. Billets

Ultimately our Auto system is a guaranteed COST AND SCRAPSAVER up to 5% for any Mill.